Factory Free sample Floor Feeding Systerm - Floor Feeding System For Chicken House – Motong

Broiler pan feeding system

Main features of broiler feeding pan
●The material volume adjustment of the external seasoning tray is divided into 5 gears, and the rest of the trays are 10 gears;
●The material door switch can adjust the output volume until the material tray is closed;
●Convenient, fast and accurate way of adjusting the discharge amount;
●The bottom of the plate can be removed and placed on the ground to be used as a feeding plate for chicks;
●The v-shaped corrugated plate bottom can reduce the amount of material stored at the bottom of the plate, and the chicks can eat freshly, preventing the chicks from lying in the pan for a long time to eat or rest;
●The edge of the feed pan is inclined to the center of the pan to avoid waste caused by spilled feed;
●Smooth the inwardly inclined outer edge to prevent broiler crops from being injured, and to eat safely and comfortably;
●The installation method of the material pan on the material pipe is divided into two types: fixed type and swing type.

Raising broiler on ground is the tradional raising mode

*Adopt hot-dip galvanization technology to ensure the service life of 15-20 years

*Automatic feeding,drinking and environment control system can heip to save energy and improce the working efficiency.

2019 Prefab Industrial Large Light Steel Structure Design Chicken Poultry Farms Houseare widely used in broilers, layers, ducks, gooses etc Main automatic chicken feedersystemis a complete set of automatic feeding system, including a material conveyingpipe,silo, auger, drive motor and a material level sensor.Main Feed line is mainlyused to deliver feed from silo to the hopper in the feeding pan system .There is onefeed sensor at the end of main feed line,which can control the drive motor on and off torealize automatically feeding. We can supply with the sevice of design, production,
shipment, and also can offer the steel frame poultry farm house as well. Welcomeinquiry us.

1. Calculate the length of the house according to the breeding quantity. For example, if you raise 15,000 chickens, use 15,000 / the width of several feeding lines /15 (the station ratio of each chicken).
2. The width is the spacing of each material line of four meters, so the width is 4, 8, 12, 16, 20
A feed line 3 meters, each of the above four feed plate
The number of fuel engines in the quotation the square of the house divided by 300

Introduction to land cultivation:
A feed line 3 meters, each of the above four feed plate

1. The material tube and the hopper are both 275g hot-dip galvanized, with a service life of more than 12 years
2. The motor is TAIWXIN imported from Taiwan
3. Material level sensor, there is a material level sensor on the last tray of each material line. When the last tray is full, the controller will let it automatically stop conveying
4. Screw auger: imported from South Africa, it is the best in the world, it can transport materials for long distances, has long toughness, and it is in every material pipe.

There is a balance pipe on the water pipe, the balance pipe is made of PVC material, and there is an anti-dwelling line. Prevent chicks from standing on top

A water line of 3 meters, each with four drinking fountains